홈 제품 소개

pipe butt fusion machine

모든 제품

퓨사매틱 전기융착 부속품 (56)

퓨즈마틱 스피고트 핑팅 (7)

퓨즈마틱 전환 장착장 (3)

완전 자동 부트 융합 용접 기계 (11)

수력 맞대기 융착 용접기 (1)

GATOR 시리즈 완전 자동 버트 퓨전 용접기 (0)

전자기접속기 (1)

엉덩이 융합 도구 (7)

전류 융합 도구 (52)

엉덩이 융합 액세서리 (5)

제가 지금 온라인 채팅 해요

pipe butt fusion machine

(75)

PE100 Hydrant Branch Saddle Kit | Fusamatic Auto Pin | 90-250mm Main × DN80 Flange | Water PN16 | No-Cut Online Branching with Riser, Flange, Gasket & Bolts for Water, Mining & Irrigation
접촉

Hydrant Branch Saddle Kit — No-Cut Online Branching from Live PE Mains The PE100 electrofusion hydrant branch saddle kit provides a fully fused, packaged solution for adding a fire hydrant or vertical riser to an existing buried PE water main — without cutting or removing a section of the main pipe. ... 자세히보기

PE100 Electrofusion Duckfoot Bend Kit | Fusamatic Auto Pin | 63-180mm Main × DN80 Flange | Water PN16 | Complete Hydrant Riser Set with Riser, Flange, Gasket & Bolts for Water, Mining & Irrigation
접촉

Complete Duckfoot Bend Kit — Ready-to-Install Hydrant Connection The PE100 electrofusion duckfoot bend kit is a pre-assembled, ready-to-install solution for connecting a buried PE water main to an above-ground fire hydrant, meter riser or valve assembly . Instead of sourcing individual components ... 자세히보기

PE100 Duckfoot Bend | Fusamatic Auto Pin | 90mm SDR11-17.6 | Water PN16 | Fully Welded Hydrant & Riser Connector with Integral Base Eliminates Mechanical Joints for Water, Mining & Irrigation
접촉

Fully Welded Duckfoot Bend for Hydrant & Riser Installations The PE100 electrofusion duckfoot bend provides a fully fused, leak-free transition from a horizontal buried PE water pipe to a vertical riser or fire hydrant installation . Unlike traditional flange or mechanical joints, the duckfoot bend ... 자세히보기

PE100 Fastcut Flanged Branch Saddle | Under Strap/Clamp | Manual Pin | DN150-250 Large Flange Outlet | Water PN16/Gas 10 Bar | DN250-630 Main | Online Tapping for Gas, Water, Wastewater & Mining
접촉

Heavy-Duty Fastcut Flanged Branch for Large-Diameter Mains The Fastcut flanged electrofusion branch saddle is a heavy-duty solution for online tapping and hot work on large PE mains from DN250 to DN630 . It combines a standard electrofusion saddle with a factory-welded stub flange and backing ring ... 자세히보기

P
접촉

Automatic-Pin Flanged Branch Saddle for Medium-Diameter Mains The flanged electrofusion branch saddle with underclamp combines a Fusamatic automatic pin with a DN80 or DN100 flanged outlet on PE mains from DN90 to DN250 . The automatic pin reads the fitting and feeds the correct welding parameters ... 자세히보기

PE100 플랜지 브랜치 새들 | 언더클램프/언더스트랩 | 수동 핀 | DN100 플랜지 아웃렛 | SDR 11-26 | 수도 PN16 / 가스 10 바 | DN225-630 메인 | 가스, 수도, 광업 및 관개용 플랜지 브랜칭
접촉

The flanged electrofusion branch saddle with underclamp/understrap provides a DN100 flanged outlet on DN225–630 PE mains, allowing direct bolted connection to flanged valves, meters, pumps, filters and other equipment — without additional transition adapters. The DP version is supplied as a complete ... 자세히보기

PE100 컴팩트 분기 새들 | 언더클램프 | 4mm 자동 핀 | 소구경 20-63mm 배출구 | 수도 PN16 / 가스 10 Bar | DN40-90 주관 | 가스, 수도, 광업 및 관개 네트워크 서비스 연결
접촉

Compact Small-Bore Service Branching on DN40–90 Mains The compact electrofusion branch saddle with underclamp provides small-bore service connections on smaller PE mains, with outlets from 20mm up to 63mm — ideal for taking off domestic services, irrigation laterals or small bypass lines. The ... 자세히보기

PE100 Large-Diameter Branch Saddle | Under Strap | Manual Pin | 110/125mm Outlet | SDR 11-26 | Water PN16 / Gas 10 Bar | DN225-630 Main | Heavy Branching for Gas, Water, Mining & Wastewater
접촉

Large-Diameter Branching on DN225–630 Mains with Under Strap The large-diameter electrofusion branch saddle with under strap is engineered for heavy branching on larger PE mains , with 110mm or 125mm outlets on main bodies from DN225 to DN630 . The sacrificial under strap provides cost- and time... 자세히보기

Page 8 of 8|< << 1 2 3 4 5 6 7 8 >> >|