Aperçu Produits

pipe butt fusion machine

Tous les produits

Raccords électrofusion Fusamatic (56)

Raccords à souder Fusamatic (7)

Raccords de transition Fusamatic (3)

Machine de soudage à fusion à fesse entièrement automatique (11)

Machine hydraulique de soudure par fusion de bout (1)

Machine de soudage par fusion bout à bout entièrement automatique série GATOR (0)

Machines de soudage par électrofusion (1)

Outil de fusion des fesses (7)

Outils à électrofusion (52)

Accessoires de soudure bout à bout (5)

Je suis en ligne une discussion en ligne

pipe butt fusion machine

(75)

PE100 Hydrant Branch Saddle Kit | Fusamatic Auto Pin | 90-250mm Main × DN80 Flange | Water PN16 | No-Cut Online Branching with Riser, Flange, Gasket & Bolts for Water, Mining & Irrigation
Contact

Hydrant Branch Saddle Kit — No-Cut Online Branching from Live PE Mains The PE100 electrofusion hydrant branch saddle kit provides a fully fused, packaged solution for adding a fire hydrant or vertical riser to an existing buried PE water main — without cutting or removing a section of the main pipe. ... Lire la suite

PE100 Electrofusion Duckfoot Bend Kit | Fusamatic Auto Pin | 63-180mm Main × DN80 Flange | Water PN16 | Complete Hydrant Riser Set with Riser, Flange, Gasket & Bolts for Water, Mining & Irrigation
Contact

Complete Duckfoot Bend Kit — Ready-to-Install Hydrant Connection The PE100 electrofusion duckfoot bend kit is a pre-assembled, ready-to-install solution for connecting a buried PE water main to an above-ground fire hydrant, meter riser or valve assembly . Instead of sourcing individual components ... Lire la suite

PE100 Duckfoot Bend | Fusamatic Auto Pin | 90mm SDR11-17.6 | Water PN16 | Fully Welded Hydrant & Riser Connector with Integral Base Eliminates Mechanical Joints for Water, Mining & Irrigation
Contact

Fully Welded Duckfoot Bend for Hydrant & Riser Installations The PE100 electrofusion duckfoot bend provides a fully fused, leak-free transition from a horizontal buried PE water pipe to a vertical riser or fire hydrant installation . Unlike traditional flange or mechanical joints, the duckfoot bend ... Lire la suite

PE100 Fastcut Flanged Branch Saddle | Under Strap/Clamp | Manual Pin | DN150-250 Large Flange Outlet | Water PN16/Gas 10 Bar | DN250-630 Main | Online Tapping for Gas, Water, Wastewater & Mining
Contact

Heavy-Duty Fastcut Flanged Branch for Large-Diameter Mains The Fastcut flanged electrofusion branch saddle is a heavy-duty solution for online tapping and hot work on large PE mains from DN250 to DN630 . It combines a standard electrofusion saddle with a factory-welded stub flange and backing ring ... Lire la suite

Collier de prise en charge automatique à bride PE100 | Collier de serrage | Bride de sortie DN80 & DN100 | Eau PN16 / Gaz 10 Bar | Tuyau principal DN90-250 | Soudage automatique avec indicateur de goupille montante pour gaz, eau, exploitation minière
Contact

Automatic-Pin Flanged Branch Saddle for Medium-Diameter Mains The flanged electrofusion branch saddle with underclamp combines a Fusamatic automatic pin with a DN80 or DN100 flanged outlet on PE mains from DN90 to DN250 . The automatic pin reads the fitting and feeds the correct welding parameters ... Lire la suite

Collier de branchement à bride PE100 | Collier de serrage/Sangle de serrage | Axe manuel | Sortie bride DN100 | SDR 11-26 | Eau PN16 / Gaz 10 Bar | Branchement à bride DN225-630 pour gaz, eau, exploitation minière et irrigation
Contact

The flanged electrofusion branch saddle with underclamp/understrap provides a DN100 flanged outlet on DN225–630 PE mains, allowing direct bolted connection to flanged valves, meters, pumps, filters and other equipment — without additional transition adapters. The DP version is supplied as a complete ... Lire la suite

Une selle à branches PE100 Compact. Une pince auto 4 mm. Une petite sortie 20-63 mm. Une prise d'eau PN16 / gaz 10 bar. Une connexion principale DN40-90.
Contact

Compact Small-Bore Service Branching on DN40–90 Mains The compact electrofusion branch saddle with underclamp provides small-bore service connections on smaller PE mains, with outlets from 20mm up to 63mm — ideal for taking off domestic services, irrigation laterals or small bypass lines. The ... Lire la suite

PE100 Large-Diameter Branch Saddle | Under Strap | Manual Pin | 110/125mm Outlet | SDR 11-26 | Water PN16 / Gas 10 Bar | DN225-630 Main | Heavy Branching for Gas, Water, Mining & Wastewater
Contact

Large-Diameter Branching on DN225–630 Mains with Under Strap The large-diameter electrofusion branch saddle with under strap is engineered for heavy branching on larger PE mains , with 110mm or 125mm outlets on main bodies from DN225 to DN630 . The sacrificial under strap provides cost- and time... Lire la suite

Page 8 of 8|< << 1 2 3 4 5 6 7 8 >> >|