Casa Prodotti

pipe butt fusion machine

Tutti i prodotti

Fittings di elettrofusione fusamatici (56)

Raccordi Fusamatic a bicchiere (7)

Raccordi di transizione Fusamatic (3)

Macchina di saldatura a fusione a poppa completamente automatica (11)

Macchina idraulica della saldatura per fusione di estremità (1)

Serie GATOR Macchina di saldatura a fusione a poppa completamente automatica (0)

Macchine per la saldatura ad elettrodifusione (1)

Strumento di fusione del sedere (7)

Strumenti per l'elettrofusione (52)

Accessori per la fusione del sedere (5)

Sono ora online in chat

pipe butt fusion machine

(75)

PE100 Hydrant Branch Saddle Kit | Fusamatic Auto Pin | 90-250mm Main × DN80 Flange | Water PN16 | No-Cut Online Branching with Riser, Flange, Gasket & Bolts for Water, Mining & Irrigation
Contatto

Hydrant Branch Saddle Kit — No-Cut Online Branching from Live PE Mains The PE100 electrofusion hydrant branch saddle kit provides a fully fused, packaged solution for adding a fire hydrant or vertical riser to an existing buried PE water main — without cutting or removing a section of the main pipe. ... Leggi di più

PE100 Electrofusion Duckfoot Bend Kit | Fusamatic Auto Pin | 63-180mm Main × DN80 Flange | Water PN16 | Complete Hydrant Riser Set with Riser, Flange, Gasket & Bolts for Water, Mining & Irrigation
Contatto

Complete Duckfoot Bend Kit — Ready-to-Install Hydrant Connection The PE100 electrofusion duckfoot bend kit is a pre-assembled, ready-to-install solution for connecting a buried PE water main to an above-ground fire hydrant, meter riser or valve assembly . Instead of sourcing individual components ... Leggi di più

PE100 Duckfoot Bend | Fusamatic Auto Pin | 90mm SDR11-17.6 | Water PN16 | Fully Welded Hydrant & Riser Connector with Integral Base Eliminates Mechanical Joints for Water, Mining & Irrigation
Contatto

Fully Welded Duckfoot Bend for Hydrant & Riser Installations The PE100 electrofusion duckfoot bend provides a fully fused, leak-free transition from a horizontal buried PE water pipe to a vertical riser or fire hydrant installation . Unlike traditional flange or mechanical joints, the duckfoot bend ... Leggi di più

PE100 Fastcut Flanged Branch Saddle | Under Strap/Clamp | Manual Pin | DN150-250 Large Flange Outlet | Water PN16/Gas 10 Bar | DN250-630 Main | Online Tapping for Gas, Water, Wastewater & Mining
Contatto

Heavy-Duty Fastcut Flanged Branch for Large-Diameter Mains The Fastcut flanged electrofusion branch saddle is a heavy-duty solution for online tapping and hot work on large PE mains from DN250 to DN630 . It combines a standard electrofusion saddle with a factory-welded stub flange and backing ring ... Leggi di più

Sella di derivazione automatica con perno flangiato PE100 | Morsetto | Uscita flangiata DN80 e DN100 | Acqua PN16 / Gas 10 Bar | Principale DN90-250 | Saldatura automatica con indicatore a perno ascendente per gas, acqua, miniere
Contatto

Automatic-Pin Flanged Branch Saddle for Medium-Diameter Mains The flanged electrofusion branch saddle with underclamp combines a Fusamatic automatic pin with a DN80 or DN100 flanged outlet on PE mains from DN90 to DN250 . The automatic pin reads the fitting and feeds the correct welding parameters ... Leggi di più

PE100 Flanged Branch Saddle. Underclamp/Understrap. Manual Pin. DN100 Flange Outlet. SDR 11-26.
Contatto

The flanged electrofusion branch saddle with underclamp/understrap provides a DN100 flanged outlet on DN225–630 PE mains, allowing direct bolted connection to flanged valves, meters, pumps, filters and other equipment — without additional transition adapters. The DP version is supplied as a complete ... Leggi di più

Sella di derivazione compatta PE100 | Morsetto inferiore | Spina automatica da 4 mm | Uscita piccolo diametro 20-63 mm | Acqua PN16 / Gas 10 Bar | Mandata DN40-90 | Attacco di servizio per reti gas, acqua, minerarie e di irrigazione
Contatto

Compact Small-Bore Service Branching on DN40–90 Mains The compact electrofusion branch saddle with underclamp provides small-bore service connections on smaller PE mains, with outlets from 20mm up to 63mm — ideal for taking off domestic services, irrigation laterals or small bypass lines. The ... Leggi di più

PE100 Large-Diameter Branch Saddle | Under Strap | Manual Pin | 110/125mm Outlet | SDR 11-26 | Water PN16 / Gas 10 Bar | DN225-630 Main | Heavy Branching for Gas, Water, Mining & Wastewater
Contatto

Large-Diameter Branching on DN225–630 Mains with Under Strap The large-diameter electrofusion branch saddle with under strap is engineered for heavy branching on larger PE mains , with 110mm or 125mm outlets on main bodies from DN225 to DN630 . The sacrificial under strap provides cost- and time... Leggi di più

Page 8 of 8|< << 1 2 3 4 5 6 7 8 >> >|