Dual Rated Water PN16 Gas 10 Bar Spigot Elbow and Butt Fusion Elbow in Virgin PE100 Black with Long Spigot Ends

The PE100 90° spigot elbow (SDR 11) is the standard dual-rated fitting for municipal pipelines — certified for Water PN16 and Gas 10 Bar. With plain pipe-end (spigot) connections on both sides, it is engineered for butt fusion jointing directly to PE100 pipe of the same SDR, delivering full-strength PE-to-PE welded joints in water mains and gas distribution networks.

Manufactured from virgin PE100 black polyethylene supplied by recognised polymer leaders such as Borealis and Ineos, our spigot elbows carry full batch traceability. The one-piece moulded construction produces a smooth bore with no seams, maximising flow and eliminating stress concentration points. Long spigot ends give the welder generous clamping and fusion space, while factory-chamfered ends follow DVS 2207 / ISO 21307 welding procedures.

The range covers d20mm to d500mm, with d25-315mm held as standard stock and larger sizes produced on request. Each fitting is individually marked with size, SDR, standard and batch codes.

• PE gas distribution networks (up to 10 Bar operating pressure)
• Municipal water mains and trunk supply lines (PN16)
• Water and gas service connections and branch take-offs
• Waste water and industrial utility pipework
• Butt fusion PE100 systems where electrofusion is not available

• Dual rated SDR 11 — Water PN16 / Gas 10 Bar, one fitting for both networks
• EN 1555-3 gas certification — approved for PE gas supply systems
• EN 12201-3 / ISO 4427-3 water certification — municipal water compliance
• Moulded one-piece construction — smooth bore, no seams, lower pressure loss
• Butt fusion jointing — full-strength PE-to-PE weld per DVS 2207 / ISO 21307
• Long spigot ends — generous clamp and weld area for the fusion machine
• Factory-chamfered ends — ready for immediate butt fusion on site
• Virgin PE100 material — Borealis / Ineos polymer, full batch traceability

SDR 11 is the most widely specified wall class in PE pipeline engineering — balancing pressure capacity, wall economy and availability. By stocking one dual-rated elbow, utilities and contractors can cover both water and gas projects, reducing inventory and simplifying specification.

Note: Z = centre-to-end dimension, L = total length over spigot ends. Dimensions follow ISO 8085-3 series conventions for moulded long spigot elbows (typical values, ± tolerance per standard). Sizes d20, d355, d400, d450 and d500 available on request. Contact us for CAD drawings.

All spigot fittings are manufactured from certified PE100 virgin material and tested against international piping system standards. Production is backed by ISO 9001 and ISO 29001 quality management systems.

• EN 1555-3 — Plastics piping systems for gas supply — Polyethylene (PE) — Part 3: Fittings
• EN 12201-3 — Plastics piping systems for water supply — Polyethylene (PE) — Part 3: Fittings
• ISO 4427-3 — Plastics piping systems for water supply — Polyethylene (PE) — Part 3: Fittings
• DVS 2207 / ISO 21307 — Butt fusion jointing procedures for PE pipes and fittings
• ISO 9001 / ISO 29001 — Quality management for pipeline product manufacture

Note: SDR 11 fittings are dual certified — Water PN16 and Gas 10 Bar (subject to national gas codes, e.g. GIS/PL2 for UK applications). Other wall classes (SDR 7.4 / 9 / 17) available in the same 90° spigot elbow range. Other certificates available on request.

Spigot elbows are individually bagged and packed in export cartons, palletised for container shipping. Each carton is labelled with size, SDR and quantity.

We stand behind the quality of our spigot fittings. Our commitment doesn't end at delivery — we provide welding and installation technical support for your PE pipeline project.

Common questions about our PE100 spigot elbows