|
|
Product Details:
Payment & Shipping Terms:
|
| Material: | Virgin PE100 Black | SDR / Rating: | SDR 11 / Water PN16 · Gas 10 Bar |
|---|---|---|---|
| Angle: | 22° (ultra-fine Micro-sweep) | Angles: | 60° (mid-angle Sweep) |
| Gas Service: | Not Rated (water/HP Only) | Standard Radius: | 3D (custom Up To 10D) |
| Manufacturing: | Mandrel Heat-Bent (no Mould) | Size Range: | D20 – D500mm (d63-315 Stock) |
| Jointing: | Butt Fusion (DVS 2207) | ||
| Highlight: | 22° Ultra-Fine Angle Seamless Bend,SDR 11 Dual-Rated Seamless Bend,Mandrel Heat-Bent HDPE Sweep Bend |
||
The PE100 22° seamless bend (SDR 11) is the ultra-fine angle in our mandrel-bent sweep range — the fitting engineers reach for when the pipeline needs only a small, precise correction off the straight design line. Dual-rated Water PN16 (1.6 MPa) and Gas 10 Bar, it is made from solid PE100 pipe heat-bent over a mandrel: continuous wall, no mould parting line, no weld seam, a smooth long-radius bore.
On long-distance water and gas transmission mains, the 22° bend lets the line track the survey centreline through gentle grade undulations without introducing a sharp directional break. Where the route has to creep around an existing utility, a foundation corner or a road offset, a 22° sweep gives just enough deflection to clear the obstruction without over-turning the alignment. Inside pump stations and water treatment plants, it trims pump-header runs and pipe-rack transitions that are plumbed only a few degrees off perpendicular.
Sitting between an 11° and a 30° fitting, the 22° bend is the go-to micro-alignment piece for medium-offset route corrections that would look awkward with a 45° elbow and over-correct with a 30° sweep.
![]()
A 45° elbow over-corrects a route that only needs a nudge; a 30° sweep can still over-turn the line on a tight survey. The 22° bend gives engineers a middle-ground ultra-fine turn — enough deflection to track the design centreline around small obstacles and grade changes, but gentle enough that stress, head loss and thrust loads stay minimal on long, high-pressure transmission mains.
The 22° seamless bend is available across the full SDR 11 range. d63–315mm is standard stock at 3D centreline radius; d20–50mm and d355–500mm are produced to order. Custom angles (11°, 15°, 18°, 25°, 28° etc.) and radii (5D / 8D / 10D) are made to drawing.
| Item | Specification |
|---|---|
| Material | Virgin PE100 (Borealis / Ineos) |
| Colour | Black (with optional blue/yellow stripes for water/gas identification) |
| Standard Dimension Ratio | SDR 11 |
| Water Pressure Rating | PN16 (1.6 MPa at 20°C) |
| Gas Pressure Rating | 10 Bar |
| Bend Angle | 22° (custom angles on request) |
| Manufacturing Process | Mandrel heat-bent (no mould) |
| Standard Centreline Radius | 3D (5D / 8D / 10D on request) |
| End Type | Spigot for butt fusion |
| Size Range | d20 – d500mm |
| Standard Stock | d63 – d315mm |
| Z / L Dimensions | Per ISO 8085-3 practice — CAD / dimension table on request |
| Marking | PE100 · SDR11 · 22° · PN16/10Bar · Batch · Date |
Note: exact Z and L dimensions depend on the selected centreline radius and angle. Send your survey offset data or grade drawing for a precise dimension sheet.
All spigot fittings are manufactured from certified PE100 virgin material and tested against international piping system standards. Production is backed by ISO 9001 and ISO 29001 quality management systems.
Note: suitable for potable water and gas transmission duty. Material certificates and test reports supplied on request.
Ultra-fine angle bends are compact and nest well in containers, making them cost-effective to ship even to remote transmission mains and plant projects.
We stand behind the quality of our spigot fittings. Our commitment doesn't end at delivery — we provide welding, angle selection and installation technical support for your water, gas or plant pipeline project.
Common questions about our 22° SDR 11 ultra-fine seamless bend
Contact Person: Miss. Lily Wu
Tel: +86 13732670405
Fax: 86-512-57805208